FRONT SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH

    1. B249345C01

      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Seat belt unfastened

      10 kΩ or higher

      1 - 2

      Seat belt fastened

      Below 1 Ω

      If the result is not as specified, replace the front seat inner belt assembly LH.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH

    1. C213676C01

      *1

      Connector A

      *2

      Connector B

      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      A-1 - A-2

      Seat belt unfastened

      10 kΩ or higher

      Seat belt fastened

      Below 1 Ω

      A-2 - B-1

      Seat belt unfastened

      Below 1 Ω

      Seat belt fastened

      10 kΩ or higher

      A-3 - B-3

      Always

      Below 1 Ω

      If the result is not as specified, replace the front seat inner belt assembly RH.