FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE

  1. INSTALL FRONT CRANKSHAFT OIL SEAL

    1. Apply MP grease to the lip of a new front crankshaft oil seal.

      Note:

      Keep the lip free of foreign objects.

    2. A202326N01

      Using SST and a hammer, tap in the front crankshaft oil seal as shown in the illustration.

      09223-50010

      Standard depth

      0 to 0.6 mm (0 to 0.0236 in.)

      Note:

      • Do not tap the front crankshaft oil seal at an angle.

      • Wipe off any excess grease from the crankshaft.

  2. INSTALL CRANKSHAFT PULLEY

    1. Align the keyway of the crankshaft pulley with the key located on the crankshaft, and then slide the crankshaft pulley into place to install it.

    2. A273396N01

      Using SST, install a new pulley bolt.

      09213-58014

      91551-80840

      09330-00021

      300 N*m

      3059 kgf*cm

      221 ft.*lbf

  3. INSTALL FAN AND GENERATOR V BELT

    Click here