VACUUM REGULATING VALVE (w/ EGR System without EGR Cooler) INSTALLATION

INSTALL ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)

1. w/ Intercooler:

   
   

   1. Install the electric vacuum regulating valve with bracket with the 2 bolts.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

   2. Connect the 4 vacuum hoses.

      Note

      Install the vacuum hoses so that they completely cover the pipes.

   3. Connect the electric vacuum regulating valve connector.

2. w/o Intercooler:

   
   

   1. Install the electric vacuum regulating valve together with the bracket with the 2 bolts.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

   2. Connect the 2 vacuum hoses.

   3. Connect the electric vacuum regulating valve connector.

INSTALL NO. 1 GAS FILTER WITH GAS FILTER BRACKET (w/ Intercooler)

1. Install the No. 1 gas filter with gas filter bracket with the bolt.

   Torque:

   20 N*m  { 204 kgf*cm, 15 ft.*lbf }

2. Connect the 2 vacuum hoses.

   Note

   Install the vacuum hoses so that they completely cover the pipes.

INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)

• w/ Intercooler: Click here

• w/o Intercooler: Click here