TCM REMOVAL

PROCEDURE

1. PRECAUTION

   CAUTION:

   Be sure to read Precaution thoroughly before servicing Click here.

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

2. REMOVE DECK BOARD ASSEMBLY

   Click here

3. REMOVE NO. 1 DECK BOARD

   Click here

4. REMOVE NO. 2 DECK BOARD

   Click here

5. REMOVE REAR DECK FLOOR BOX

   Click here

6. REMOVE DECK FLOOR BOX RH

   Click here

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

10. REMOVE ECU INTEGRATION BOX RH (for LHD)

    Click here

11. REMOVE ECU INTEGRATION BOX LH (for RHD)

    Click here

12. REMOVE TRANSMISSION CONTROL ECU ASSEMBLY

    
    
    1. 

       Text in Illustration

       *A	for LHD
       *B	for RHD
       *1	Transmission Control ECU Assembly
       *a	Claw

       Disengage the 2 claws and remove the transmission control ECU assembly from the ECU integration box.