REAR COMBINATION LIGHT ASSEMBLY(w/o Rear No. 2 Seat) INSPECTION

PROCEDURE

  1. INSPECT REAR COMBINATION LIGHT LENS AND BODY LH

    1. E184688E03

      Check the stop light.

      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK

        Measurement Condition

        Specified Condition

        Battery positive (+) → 5 (STOP)

        Battery negative (-) → 6 (E)

        LED illuminates
        Table 1. Text in Illustration

        *1

        Component without harness connected

        (Rear Combination Light Lens and Body)

        If the result is not as specified, replace the rear combination light lens and body.

  2. INSPECT REAR COMBINATION LIGHT LENS AND BODY RH

    1. E184688E04

      Check the stop light.

      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK

        Measurement Condition

        Specified Condition

        Battery positive (+) → 2 (STOP)

        Battery negative (-) → 1 (E)

        LED illuminates
        Table 2. Text in Illustration

        *1

        Component without harness connected

        (Rear Combination Light Lens and Body)

        If the result is not as specified, replace the rear combination light lens and body.