THROTTLE BODY INSPECTION

PROCEDURE


  1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY


    1. B006E8WC02
      *A for Bank 1
      *B for Bank 2
      *a

      Component without harness connected

      (Throttle Body with Motor Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance (for Bank 1)
      Tester Connection Condition Specified Condition
      D9-5 (M-) - D9-6 (M+) 20°C (68°F) 0.3 to 100 Ω
      Standard Resistance (for Bank 2)
      Tester Connection Condition Specified Condition
      D37-5 (M2-) - D37-6 (M2+) 20°C (68°F) 0.3 to 100 Ω

      If the result is not as specified, replace the throttle body with motor assembly.