TRANSFER INDICATOR SWITCH ON-VEHICLE INSPECTION


  1. INSPECT TRANSFER INDICATOR SWITCH (for 4WD Position)

    A01DW7Q

    1. Measure the resistance of the switch.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher

      If the result is not as specified, replace the switch.

  2. INSPECT TRANSFER INDICATOR SWITCH (for 4L Position)

    A01DW7Q

    1. Measure the resistance of the switch.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher

      If the result is not as specified, replace the switch.

  3. INSPECT TRANSFER INDICATOR SWITCH (for Neutral Position)

    A01DW7Q

    1. Measure the resistance of the switch.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher

      If the result is not as specified, replace the switch.