REAR SPEED SENSOR(for 2WD) INSPECTION

PROCEDURE

1. INSPECT SKID CONTROL SENSOR

   1. Check the skid control sensor.

      Under any of the following conditions, replace the skid control sensor with a new one.

      • The surface of the skid control sensor is cracked, dented, or chipped off.

      • The skid control sensor has been dropped.

2. INSPECT SKID CONTROL SENSOR WIRE

   1. Check the skid control sensor wire.

      Under any of the following conditions, replace the skid control sensor wire with a new one.

      • The connector or wire harness is scratched, cracked, or damaged.