FRONT SUSPENSION MEMBER INSTALLATION

PROCEDURE

1. INSTALL STEERING GEAR ASSEMBLY

   Click hereClick here

2. INSTALL FRONT STABILIZER BAR

   Click here

3. INSTALL FRONT SUSPENSION MEMBER FRONT BRACE LH

   Click here

4. INSTALL FRONT SUSPENSION MEMBER FRONT BRACE RH

   Click here

5. TEMPORARILY INSTALL FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH

   Click here

6. TEMPORARILY INSTALL FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH

   Tip:

   Perform the same procedure as for the LH side.

7. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

   Click here

8. INSTALL FRONT SUSPENSION MEMBER REAR BRACE LH

   Click here

9. INSTALL FRONT SUSPENSION MEMBER REAR BRACE RH

   Click here

10. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY LH

    Click here

11. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH

    Click here

12. INSTALL FRONT LOWER ENGINE MOUNTING BRACKET REINFORCEMENT

    Click here

13. CONNECT FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH

    Click here

14. CONNECT FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH

    Tip:

    Perform the same procedure as for the LH side.

15. CONNECT TIE ROD END SUB-ASSEMBLY LH

    Click hereClick here

16. CONNECT TIE ROD END SUB-ASSEMBLY RH

    Tip:

    Perform the same procedure as for the LH side.

17. CONNECT FRONT STABILIZER LINK ASSEMBLY LH

    Click here

18. CONNECT FRONT STABILIZER LINK ASSEMBLY RH

    Tip:

    Perform the same procedure as for the LH side.

19. INSTALL NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

    Click hereClick here

20. CONNECT NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY

    Click here

21. INSTALL COLUMN HOLE COVER SILENCER SHEET

    Click here

22. INSTALL NO. 2 ENGINE UNDER COVER

    Click here

23. INSTALL REAR ENGINE UNDER COVER LH

    Click here

24. INSTALL REAR ENGINE UNDER COVER RH

    Tip:

    Perform the same procedure as for the LH side.

25. INSTALL FRONT WHEELS

    103 N*m

    1050 kgf*cm

    76 ft.*lbf

26. STABILIZE SUSPENSION

    Click here

27. INSTALL CENTER NO. 4 ENGINE UNDER COVER

    Click here

28. INSTALL NO. 1 ENGINE UNDER COVER (for 1ZR-FAE, 2ZR-FAE)

    Click here

29. INSTALL NO. 1 ENGINE UNDER COVER (for 1WW)

    Click here

30. TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH

    Click here

31. TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH

    Tip:

    Perform the same procedure as for the LH side.

32. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

    1. Inspect and adjust the front wheel alignment (Click here).

33. ADJUST HEADLIGHT ASSEMBLY

    1. for Halogen Headlight:

       Adjust the headlight assembly (Click here).

    2. for HID Headlight:

       Adjust the headlight assembly (Click here).