CRANKSHAFT POSITION SENSOR (w/o DPF) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. SEPARATE VANE PUMP OIL RESERVOIR ASSEMBLY


    1. B007UZF

      Remove the 2 bolts and disconnect the vane pump oil reservoir.

  3. REMOVE CRANKSHAFT POSITION SENSOR

    B007VEA

    1. Disconnect the crankshaft position sensor connector.

    2. Separate the connector from the No. 1 vacuum pipe .

    3. B007OTL

      Separate the 3 wire harness clamps.

    4. Remove the bolt and the crankshaft position sensor.