EXHAUST PIPE GAS CONTROL ACTUATOR REMOVAL

PROCEDURE


  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  2. DRAIN COOLANT (for Engine)

    Click here

  3. REMOVE EXHAUST PIPE GAS CONTROL ACTUATOR SUB-ASSEMBLY


    1. A005EQEE01
      Text in Illustration
      *1 Flange of Exhaust Pipe Gas Control Actuator Sub-assembly
      A005B9E Area to be Cleaned

      Clean the area shaded in the illustration to prevent foreign matter from entering the cooling system.

    2. A005BTG

      Remove the 5 bolts, exhaust pipe gas control actuator sub-assembly, exhaust by-pass pipe and No. 2 exhaust pipe heat insulator.

      Note


      • When removing the exhaust pipe gas control actuator sub-assembly, use caution because coolant may spill out from the exhaust heat recirculation system.

      • Do not apply any excessive force to the exhaust by-pass pipe when removing the exhaust pipe gas control actuator sub-assembly.

    3. Remove the exhaust by-pass pipe from the exhaust pipe gas control actuator sub-assembly.