FRONT DOOR OPENING TRIM WEATHERSTRIP INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. Clean the vehicle body.

    2. B004G6OC01
      *a Alignment Mark

      Install a new front door opening trim weatherstrip as shown in the illustration.

      Note

      After installation, check that the corners fit correctly.

  2. INSTALL ROOF SIDE RAIL WEATHERSTRIP


    1. Clean the vehicle body.

    2. Remove the release paper from a new roof side rail weatherstrip.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Engage the 6 clips and install the roof side rail weatherstrip.

      B004F8MC01
      *a Double-sided Tape *b Butyl Tape

  3. INSTALL CENTER PILLAR GARNISH ASSEMBLY

    Click here

  4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY

    Click here

  5. INSTALL REAR SIDE SEATBACK ASSEMBLY

    Click here

  6. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    Click here

  7. CONNECT FRONT SEAT OUTER BELT ASSEMBLY

    Click here

  8. INSTALL LAP BELT OUTER ANCHOR COVER

    Click here

  9. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  10. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  11. INSTALL FRONT PILLAR GARNISH

    Click here

  12. INSTALL FRONT DOOR OPENING TRIM COVER

    Click here

  13. INSTALL FRONT DOOR SCUFF PLATE

    Click here