PRE-CRASH SAFETY SYSTEM CANCEL SWITCH INSPECTION

PROCEDURE

  1. INSPECT PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (w/o Stop And Start System)

    1. E319087C01

      *a

      Component without harness connected

      (Pre-crash System Cancel Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      4 (ECU) - 1 (E)

      Pushed

      Below 1 Ω

      Not pushed

      10 kΩ or higher

      If the result is not as specified, replace the pre-crash system cancel switch assembly.

  2. INSPECT PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (COMBINATION SWITCH ASSEMBLY) (w/ Stop And Start System)

    1. E319088C01

      *a

      Component without harness connected

      (Pre-crash System Cancel Switch Assembly (Combination Switch Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      4 (ECU) - 3 (E)

      Pushed

      Below 1 Ω

      Not pushed

      10 kΩ or higher

      If the result is not as specified, replace the pre-crash system cancel switch assembly (combination switch assembly).