RADIO RECEIVER INSTALLATION

PROCEDURE

1. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

2. INSTALL NAVIGATION ECU (w/ Navigation System)

3. INSTALL NO. 1 RADIO RECEIVER BRACKET

   
   

   1. w/o Navigation System:

      
      

      1. Install the No. 1 radio receiver bracket with the 3 screws.

   2. w/ Navigation System:

      
      

      1. Install the No. 1 radio receiver bracket with the 5 screws.

4. INSTALL NO. 2 RADIO RECEIVER BRACKET

   
   

   1. w/o Navigation System:

      
      

      1. Install the No. 2 radio receiver bracket with the 3 screws.

   2. w/ Navigation System:

      
      

      1. Install the No. 2 radio receiver bracket with the 5 screws.

5. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Navigation System)

   Click here

6. INSTALL NO. 1 NAVIGATION WIRE (w/ Navigation System)

   Click here

7. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

   
   

   1. Connect each connector.

   2. Engage the 2 guides and 5 claws.

   3. Install the radio and display receiver assembly with bracket with the 4 bolts.

8. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

9. INSTALL INSTRUMENT PANEL BOX ASSEMBLY

   Click here

10. INSTALL INTEGRATION CONTROL AND PANEL

    Click here

11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here

12. INSTALL DECK FLOOR BOX RH

    Click here

13. INSTALL REAR DECK FLOOR BOX

    Click here

14. INSTALL NO. 1 DECK BOARD

    Click here

15. INSTALL NO. 2 DECK BOARD

    Click here

16. INSTALL DECK BOARD ASSEMBLY

    Click here