LIGHTING SYSTEM


  1. FUNCTION


    1. The illuminated entry system has the following functions:

      Function Outline Lights that Operate
      Actuation Area-linked*1 When the electrical key transmitter sub-assembly enters any actuation area around the doors, the lights that operate turn on.

      • Engine Switch Illumination*1

      • Map Light Assembly (Front Room Light)

      • No. 1 Room Light Assembly (Rear Room Light)
      Electrical Key Transmitter Sub-assembly-linked When any door is unlocked using the electrical key transmitter sub-assembly, the lights that operate turn on.

      • Engine Switch Illumination*1

      • Ignition Key Ring Illumination*2

      • Map Light Assembly (Front Room Light)

      • No. 1 Room Light Assembly (Rear Room Light)
      Door Open-linked When any door is opened, the lights that operate turn on.

      • Engine Switch Illumination*1

      • Ignition Key Ring Illumination*2

      • Map Light Assembly (Front Room Light)

      • No. 1 Room Light Assembly (Rear Room Light)
      Door Close-linked When all doors are closed, the lights that operate turn off.*3

      • Engine Switch Illumination*1

      • Ignition Key Ring Illumination*2

      • Map Light Assembly (Front Room Light)

      • No. 1 Room Light Assembly (Rear Room Light)
      Door Lock-linked When all doors are locked, the lights that operate turn off.*4

      • Engine Switch Illumination*1

      • Ignition Key Ring Illumination*2

      • Map Light Assembly (Front Room Light)

      • No. 1 Room Light Assembly (Rear Room Light)
      Power Source-linked When the ignition switch is changed from off to ACC or ON, the lights that operate turn off.*3

      • Engine Switch Illumination*1

      • Ignition Key Ring Illumination*2

      • Map Light Assembly (Front Room Light)

      • No. 1 Room Light Assembly (Rear Room Light)
      When the ignition switch is changed from ACC or ON to off, the lights turn on.
      Battery Saving When no changes occur in the condition of the doors for 20 minutes, these lights turn off.

      • Engine Switch Illumination*1

      • Ignition Key Ring Illumination*2

      • Map Light Assembly (Front Room Light)

      • No. 1 Room Light Assembly (Rear Room Light)

      • No. 2 Room Light Assembly
      Interior Light Auto Cut When no changes occur in the condition of the lights switches on for 20 minutes, these lights turn off.

      • Engine Switch Illumination*1

      • Ignition Key Ring Illumination*2

      • Map Light Assembly (Front Room Light)

      • No. 1 Room Light Assembly (Rear Room Light)

      • No. 2 Room Light Assembly

      Tech Tips

      *1: Models with entry and start system

      *2: Models without entry and start system

      *3: Illuminates for approximately 15 seconds, fades out over approximately 0.9 seconds and goes off. Illumination time can be selected from 15, 30 and 7.5 seconds using the customization function.

      *4: Stops the illumination, starts to fade out immediately (fades out over approximately 0.9 seconds) and goes off.