OUTER REAR VIEW MIRROR DISASSEMBLY

CAUTION / NOTICE / HINT

Tip:
  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH

  2. REMOVE OUTER MIRROR COVER LH

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

  4. REMOVE SIDE TELEVISION CAMERA ASSEMBLY LH

  5. REMOVE LOWER OUTER MIRROR COVER LH

    1. B341731C01

      *1

      Tape

      Remove the tape.

    2. B340670

      Detach the 5 guides.

    3. B340668

      Detach the 5 claws to remove the lower outer mirror cover LH.

  6. REMOVE OUTER MIRROR RETRACTOR LH

    1. B341732C01

      *a

      Cut the harness sub-assembly here

      Cut the harness sub-assembly at the position shown in the illustration.

      Note:

      Make sure to replace the harness sub-assembly with a new one.

    2. B342418

      Remove the gasket sub-assembly from the outer rear view mirror assembly LH.

    3. B341738

      Using a T25 "TORX" socket wrench, remove the 3 screws.

      Note:

      Make sure to replace the "TORX" screws with new ones.

    4. B342733

      Remove the 2 screws and frame sub-assembly as shown in the illustration.

    5. B341737

      Disconnect the connector.

    6. Remove the harness sub-assembly from the frame sub-assembly.

    7. B342734

      Remove the 4 screws and support.