MONOLITHIC CONVERTER COMPONENTS
ILLUSTRATION
| *1 | NO. 3 ENGINE UNDER COVER | *2 | NO. 1 ENGINE UNDER COVER |
| *3 | FRONT WHEEL OPENING EXTENSION PAD LH | *4 | FRONT WHEEL OPENING EXTENSION PAD RH |
ILLUSTRATION
| *A | w/ Canister Pump Module | - | - |
| *1 | FRONT EXHAUST PIPE ASSEMBLY | *2 | EXHAUST PIPE GASKET |
| *3 | COMPRESSION SPRING | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/o Canister Pump Module | - | - |
| *1 | FRONT EXHAUST PIPE ASSEMBLY | *2 | EXHAUST PIPE GASKET |
| *3 | COMPRESSION SPRING | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/ Differential Pressure Sensor | - | - |
| *1 | AIR CLEANER CAP WITH AIR CLEANER HOSE | *2 | INTAKE AIR CONNECTOR |
| *3 | NO. 1 ENGINE COVER SUB-ASSEMBLY | *4 | NO. 2 AIR CLEANER HOSE |
| *5 | VENTILATION HOSE | *6 | NO. 4 VENTILATION HOSE |
| *7 | DIFFERENTIAL PRESSURE SENSOR | *8 | VACUUM TRANSMITTING HOSE ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/o Differential Pressure Sensor | - | - |
| *1 | AIR CLEANER CAP WITH AIR CLEANER HOSE | *2 | INTAKE AIR CONNECTOR |
| *3 | NO. 1 ENGINE COVER SUB-ASSEMBLY | *4 | NO. 2 AIR CLEANER HOSE |
| *5 | VENTILATION HOSE | *6 | NO. 4 VENTILATION HOSE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for Rear Air Fuel Ratio Sensor | *B | w/ Differential Pressure Sensor |
| *1 | AIR FUEL RATIO SENSOR | *2 | OUTLET COMPRESSOR ELBOW |
| *3 | EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY | *4 | INTAKE AIR RESONATOR |
| *5 | NO. 1 EXHAUST MANIFOLD HEAT INSULATOR | *6 | NO. 2 EXHAUST MANIFOLD HEAT INSULATOR |
| *7 | NO. 5 EXHAUST MANIFOLD HEAT INSULATOR | *8 | STUD BOLT |
| *9 | EXHAUST PIPE CLAMP | *10 | OUTLET TURBINE ELBOW GASKET |
| *11 | TURBOCHARGER STAY | *12 | VACUUM TRANSMITTING HOSE ASSEMBLY |
| *13 | MANIFOLD STAY | *14 | NO. 1 VACUUM PIPE |
| *15 | OUTLET COMPRESSOR GASKET | *16 | AIR TUBE GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | for use with SST | *T2 | for use with union nut wrench |
ILLUSTRATION
| *A | for Rear Heated Oxygen Sensor | - | - |
| *1 | AIR FUEL RATIO SENSOR | *2 | OUTLET COMPRESSOR ELBOW |
| *3 | EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY | *4 | INTAKE AIR RESONATOR |
| *5 | NO. 1 EXHAUST MANIFOLD HEAT INSULATOR | *6 | NO. 2 EXHAUST MANIFOLD HEAT INSULATOR |
| *7 | NO. 5 EXHAUST MANIFOLD HEAT INSULATOR | *8 | STUD BOLT |
| *9 | EXHAUST PIPE CLAMP | *10 | OUTLET TURBINE ELBOW GASKET |
| *11 | TURBOCHARGER STAY | *12 | VACUUM TRANSMITTING HOSE ASSEMBLY |
| *13 | MANIFOLD STAY | *14 | OUTLET COMPRESSOR GASKET |
| *15 | AIR TUBE GASKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | for use with SST | *T2 | for use with union nut wrench |