REAR EVAPORATOR TEMPERATURE SENSOR REASSEMBLY

PROCEDURE

1. INSTALL REAR EVAPORATOR TEMPERATURE SENSOR

   1. 

      Move the tip of the sensor in the direction indicated by the arrow in the illustration to install it to the bracket plate.

   2. Attach the 2 claws to install the sensor.

2. INSTALL REAR EVAPORATOR SUB-ASSEMBLY

   Click here

3. INSTALL REAR COOLING UNIT EXPANSION VALVE

   Click here

4. INSTALL BLOWER MOTOR CONTROLLER

   Click here

5. INSTALL REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY

   Click here

6. INSTALL HEATER BRACKET

   Click here

7. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

   Click here

8. INSTALL AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

   Click here

9. INSTALL REAR MODE DAMPER SERVO SUB-ASSEMBLY

   Click here

10. INSTALL COOLER BRACKET

    Click here

11. INSTALL REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY

    Click here

12. INSTALL REAR SIDE NO. 4 AIR DUCT (w/ Rear Air Duct)

    Click here