PTC HEATER ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 1 AIR DUCT

    for Manual Tilt and Manual Telescopic Steering Column:

    Click here

    for Power Tilt and Power Telescopic Steering Column:

    Click here

  3. REMOVE NO. 2 HEATER COVER


    1. B0084LQ

      Disconnect the 2 connectors.

    2. Disengage the clamp.

    3. B0087UO

      Remove the screw.

    4. Disengage the claw and each guide to remove the No. 2 heater cover.

  4. REMOVE QUICK HEATER ASSEMBLY


    1. B0086VKC01
      B00847Z Remove in this Direction

      Remove the quick heater assembly as shown in the illustration.