REAR VIEW MONITOR SYSTEM(for Sedan) DTC CHECK / CLEAR

  1. CHECK DTC

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

      Body Electrical > Navigation System > Trouble Codes

    5. Check for DTCs.

      Click here

      Note:

      The radio and display receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the rear view monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.

      System

      Proceed to

      Audio and Visual System (for Sedan Radio and Display Type)*1

      Click hereClick here

      Navigation System (for Sedan)*2

      Click hereClick hereClick hereClick here

      *1: w/o Navigation System

      *2: w/ Navigation System

  2. CLEAR DTC

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

      Body Electrical > Navigation System > Clear DTCs

    5. Clear the DTCs.