STEERING KNUCKLE REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE FRONT AXLE ASSEMBLY

    Click hereClick hereClick hereClick here

  2. REMOVE FRONT LOWER BALL JOINT ASSEMBLY

    Click here

  3. REMOVE STEERING KNUCKLE

    1. Secure the front axle assembly between aluminum plates in a vise.

      Note:

      Do not overtighten the vise.

    2. C214378

      Remove the 4 bolts, front axle hub sub-assembly and front disc brake dust cover from the steering knuckle.

      Note:

      • Do not drop the front axle hub sub-assembly.

      • Do not allow the magnet rotor side to become damaged or contact foreign matter.