PARKING BRAKE SWITCH INSPECTION

PROCEDURE

  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY

    1. C246250C03

      *a

      On

      *b

      Off

      *c

      Terminal

      *d

      Nut

      Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

      Table 1. Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      Terminal - Nut

      On (When shaft is not pressed)

      Below 1 Ω

      Terminal - Nut

      Off (When shaft is pressed)

      10 kΩ or higher

      If the value is not as specified, replace the parking brake switch assembly.