OIL PRESSURE SWITCH INSPECTION

PROCEDURE

  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

    1. Disconnect the oil pressure switch connector.

    2. Start the engine.

    3. A159695

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - Switch body

      Idling

      10 kΩ or higher

      Engine stopped

      Below 1 Ω

      If the result is not as specified, replace the oil pressure switch assembly.

    4. Connect the oil pressure switch connector.