AIR CONDITIONING SYSTEM


  1. OUTLINE


    1. An automatic air conditioning system, a manual air conditioning system, a manual cooler system or a manual heater system is used depending on models.

    2. The automatic air conditioning system uses neural network control to enhance comfort.

  2. SPECIFICATIONS

    Automatic Air Conditioning, Manual Air Conditioning System
    Item Specifications
    Automatic Air Conditioning System Manual Air Conditioning System
    Blower Motor with Fan Sub-assembly Motor Type 4 Pole Motor
    Fan Type Semi-sirocco
    Fan Size (Dia. x H) 137 mm x 70 mm (5.4 in. x 2.8 in.)
    Cooler Condenser Assembly Type Global Inner-fin Condenser
    Size (W x H x D) 580 mm x 517 mm x 11.5 mm (22.8 in. x 20.4 in. x 0.5 in.)
    Fin Pitch

    3.4 mm (0.13 in.)*1

    3.0 mm (0.12 in.)*2
    No. 1 Cooler Evaporator Sub-assembly Type

    Beneficial Refrigerant Stream (BRS)*3

    Cold-Storage (CS)*4
    Size (W x H x D) 231 mm x 239.5 mm x 38 mm (9.1 in. x 9.4 in. x 1.5in.)
    Fin Pitch 3.0 mm (0.12 in.)
    Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum (SFA)-II
    Size (W x H x D) 222.3 mm x 120 mm x 27 mm (8.8 in. x 4.7 in. 1.1 in.)
    Fin Pitch 1.8 mm (0.07 in.)
    Cooler Compressor Assembly Type

    10S15C*5

    10S11C*6

    10SRE11C*7

    10SRE15C*8

    10SRE11*9
    Refrigerant Type HFC-134a (R-134a)
    Charge Volume 500 g

    *1: Models with 1TR-FE engine, 2TR-FE engine, 1GR-FE engine, 1GD-FTV engine or 2GD-FTV engine

    *2: Models with 1KD-FTV engine or 2KD-FTV engine

    *3: Models without stop and start system

    *4: Models with stop and start system

    *5: Models with 1KD-FTV engine, 2KD-FTV engine (except models for G.C.C. Countries) or 5L-E engine

    *6: Models for G.C.C. countries with 1KD-FTV engine or 2KD-FTV engine

    *7: Models with 1TR-FE engine, 2TR-FE engine, 1GR-FE engine, 1GD-FTV engine or 2GD-FTV engine (except models for G.C.C. Countries)

    *8: Models for G.C.C. Countries with 1TR-FE engine or 2TR-FE engine

    *9: Models for G.C.C. Countries with 2GD-FTV engine

    Manual Cooler, Manual Heater System
    Item Specifications
    Manual Cooler System Manual Heater System
    Blower Motor with Fan Sub-assembly Motor Type 4 Pole Motor
    Fan Type Semi-sirocco
    Fan Size (Dia. x H) 137 mm x 70 mm (5.4 in. x 2.8 in.)
    Cooler Condenser Assembly Type Global Inner-fin Condenser -
    Size (W x H x D) 580 mm x 517 mm x 11.5 mm (22.8 in. x 20.4 in. x 0.5 in.) -
    Fin Pitch 3.0 mm (0.12 in.) -
    No. 1 Cooler Evaporator Sub-assembly*1 Type Beneficial Refrigerant Stream (BRS)
    Size (W x H x D) 231 mm x 239.5 mm x 38 mm (9.1 in. x 9.4 in. x 1.5 in.)
    Fin Pitch 3.0 mm (0.12 in.)
    Heater Radiator Unit Sub-assembly Type - Straight Flow Aluminum (SFA)-II
    Size (W x H x D) - 222.3 mm x 120 mm x 27 mm (8.8 in. x 4.7 in. x 1.1in.)
    Fin Pitch - 1.8 mm (0.07 in.)
    Cooler Compressor Assembly Type 10S15C -
    Refrigerant Type HFC-134a (R-134a) -
    Charge Volume 500 g -

    *1: On models with manual heater system, the No. 1 cooler evaporator sub-assembly has been provided,but is not used.

  3. MAIN FEATURES


    1. The air conditioning system has the following features:

      Feature Outline
      High Performance

      • Neural network control is used, so passengers can finely control the air conditioning for maximum comfort.*1

      • Depending on the models, the rear outlets are installed on the back of the center console to ensure comfortable air conditioning performance for the rear passengers.

      • A pollen removal type clean air filter (air refiner element) is used.*2

      • The blower control has 7 levels in manual mode and 31 levels in auto mode for more precise control.*1
      Light Weight*1

      • A bus connector with a built-in IC is used in a lightweight wire harness design to allow for a reduced number of wires.

      • The use of this connector means that pulse pattern type servo motors can be used.
      Others

      The following parts are used to ensure high cooling performance while achieving a compact and lightweight construction:


      • Semi-center Location Air Conditioning Unit

      • Beneficial Refrigerant Stream (BRS) Evaporator*3

      • Cold-Storage (CS) Evaporator*4

      • Straight Flow Aluminum (SFA)-II Heater Radiator Sub-assembly

      • Global Inner-fin Condenser (GIC)

      *1: Models with automatic air conditioning system

      *2: Models with pollen removal type clear air filter

      *3: Models without stop and start system

      *4: Models with stop and start system