FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

   CAUTION:

   
   

   • The nuts must not be reused.

   • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

   
   

   1. Install the front seat airbag assembly with 2 new nuts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Engage the 2 clamps.

2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

   Click here

3. CONNECT FRONT SEAT AIRBAG ASSEMBLY

   
   

   1. w/ Seat Heater System:

      
      

      1. Engage the clamp to connect the seat heater wire harness.

   2. Engage the fastener to install the airbag wire harness.

   3. Connect the rubber band.

4. INSTALL FRONT SEAT ASSEMBLY

   Click here

5. PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here