ECM INSTALLATION


  1. INSTALL NO. 2 ECM BRACKET


    1. A01E314

      for LHD:

      Install the bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }
    2. A01DYC9

      for RHD:

      Install the bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 1 ECM BRACKET


    1. A01DYG4

      for LHD:

      Install the bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }
    2. A01DYBY

      for RHD:

      Install the bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL ECM


    1. A01DZSME03

      Install the ECM with the bolt and 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 4 connectors.

  4. INSTALL TURBO MOTOR DRIVER (for Motor Controlled Actuator)


    1. A01E1TLE03

      Install the turbo motor driver with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the connector.

  5. INSTALL 4WD CONTROL ECU (for 4WD)


    1. A01DVIHE02

      Install the 4WD control ECU with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the connector.

  6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01E050E01
    Text in Illustration
    *1 Hinge

    1. Attach the 2 hinges to install the glove compartment door.

    2. A01E1H5E01
      Text in Illustration
      *1 Stopper

      While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. PERFORM REGISTRATION (w/ EGR Cooler)


    1. Perform registration Click here.

  9. PERFORM REGISTRATION (w/o EGR Cooler)


    1. Perform registration Click here.

  10. START ENGINE (w/ EGR Cooler)

    Note

    After replacing the ECM, the new ECM needs to be initialized Click here.

  11. START ENGINE (w/o EGR Cooler)

    Note

    After replacing the ECM, the new ECM needs to be initialized Click here.