REAR BUMPER INSTALLATION

CAUTION / NOTICE / HINT

Tip:

A bolt without a torque specification is shown in the standard bolt chart (Click here).

PROCEDURE

  1. INSTALL ELECTRICAL KEY ANTENNA

    1. Install the electrical key antenna with the bolt.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

  2. INSTALL REAR BUMPER SIDE MOUNTING BRACKET LH

    1. Connect the connector.

    2. Install the rear bumper side mounting bracket with the bolt.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

  3. INSTALL REAR BUMPER SIDE MOUNTING BRACKET RH

    Tip:

    Use the same procedure described for the LH side.

  4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH

    1. Install the No. 2 rear bumper side support with the bolts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

  5. INSTALL UPPER REAR BUMPER RETAINER LH

    1. Attach the clip to install the upper rear bumper retainer.

  6. INSTALL UPPER REAR BUMPER RETAINER RH

    Tip:

    Use the same procedure described for the LH side.

  7. INSTALL REAR COMBINATION LIGHT LENS AND BODY LH

    Click here

  8. INSTALL REAR COMBINATION LIGHT LENS AND BODY RH

    Tip:

    Use the same procedure described for the LH side.

  9. INSTALL REAR BUMPER BAR REINFORCEMENT LH

    1. Install the rear bumper bar reinforcement with the 3 bolts.

      25 N*m

      255 kgf*cm

      18 ft.*lbf

  10. INSTALL REAR BUMPER BAR REINFORCEMENT RH

    Tip:

    Use the same procedure described for the LH side.

  11. INSTALL REAR BUMPER SIDE SUPPORT LH

    1. Attach the 4 claws to install the rear bumper side support.

    2. Install the 3 screws.

  12. INSTALL REAR BUMPER SIDE SUPPORT RH

    Tip:

    Use the same procedure described for the LH side.

  13. INSTALL NO. 3 REAR BUMPER SIDE SUPPORT

    1. Install the No. 3 rear bumper side support with the screw.

      3.0 N*m

      31 kgf*cm

      27 ft.*lbf

  14. INSTALL REAR BUMPER COVER

    1. Connect the 3 connectors.

    2. Attach the 12 claws to install the rear bumper cover.

    3. Install the 6 bolts, 2 screws and 2 clips.

      for bolt

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

  15. INSTALL REAR BUMPER BAR PLATE

    1. Attach the 14 claws to install the rear bumper bar plate.

  16. INSTALL JACK BOX HOLE COVER

    1. Attach the 2 claws to install the jack box hole cover.

  17. INSTALL REAR BUMPER PROTECTOR LH

    Click here

  18. INSTALL REAR BUMPER PROTECTOR RH

    Tip:

    Use the same procedure described for the LH side.

  19. INSTALL REAR QUARTER PANEL MUDGUARD LH

    Click here

  20. INSTALL REAR QUARTER PANEL MUDGUARD RH

    Tip:

    Use the same procedure described for the LH side.