REAR SEAT ASSEMBLY(for RH Side) REMOVAL

PROCEDURE

  1. REMOVE REAR SEAT FRONT BRACKET COVER RH

    1. B336599

      Using a screwdriver, detach the 4 claws.

      Tip:

      Tape the screwdriver tip before use.

    2. Detach the 2 guides and remove the rear seat front bracket cover RH in the direction shown by the arrow in the illustration.

  2. REMOVE REAR SEAT NO. 2 LEG SIDE COVER

    1. B336598

      Using a screwdriver, detach the 4 claws to remove the rear seat No. 2 leg side cover.

      Tip:

      Tape the screwdriver tip before use.

  3. REMOVE REAR SEAT ASSEMBLY RH

    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. B336603

      Remove the 2 bolts on the front side of the seat.

    3. Lift up the seat track adjusting handle and move the seat to the foremost position.

    4. B336606C01

      *1

      Rubber Band

      w/ Seat belt warning system:

      Disconnect the 2 connectors.

    5. Detach the rubber band.

    6. Remove the 3 bolts on the rear side of the seat.

    7. Fully tilt the seatback forward. Then remove the seat.

      Note:

      Be careful not to damage the vehicle body.

  4. REMOVE SEAT LEG BRACKET

    B336604

    1. Detach the clamp and remove the 4 bolts.

    2. Detach the guide to remove the seat leg bracket.