MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here

  2. REMOVE MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. A004JL6E02

      Using SST, remove the manual transmission extension housing oil seal.

      SST
      09308-00010

  3. INSTALL MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. Coat the lip of a new manual transmission extension housing oil seal with MP grease.

    2. A004HT4E01

      Using SST and a hammer, tap in the manual transmission extension housing oil seal.

      SST
      09325-20010
      Installation depth
      0.1 to 1.1 mm (0.00394 to 0.0433 in.)

      Note


      • Keep the lip free of foreign matter.

      • Do not tap the oil seal at an angle.

  4. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here