FUEL PUMP REASSEMBLY

PROCEDURE

  1. INSTALL FUEL PUMP

    Tip:

    Perform "Inspection After Repair" after replacing the fuel pump.

    Click here

    1. A288172C01

      *1

      O-ring

      *2

      Fuel Pump Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.

    2. Connect the fuel pump harness connector.

    3. Engage the 5 claws of the fuel pump.

      Note:

      • Do not remove the suction filter.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

    4. Engage the 2 claws of the No. 1 fuel suction support.

    5. Engage the 2 claws of the No. 1 fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    6. A217126

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and connect the fuel pump filter hose.

      Note:

      Do not apply excessive force to the fuel tube or the No. 1 fuel suction support.

    7. Connect the fuel pump harness connector.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here