AIR CONDITIONING PANEL INSTALLATION

PROCEDURE

1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

   
   

   1. Connect the connector.

   2. 

      Engage the 4 claws to install the air conditioning control assembly as shown in the illustration.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

3. INSTALL CONSOLE BOX ASSEMBLY

   Click here

4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)

   Click here

5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

   Click here

6. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

   Click here

7. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

8. INSTALL INSTRUMENT PANEL BOX ASSEMBLY

   Click here

9. INSTALL INTEGRATION CONTROL AND PANEL

   Click here

10. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

11. INSTALL DECK FLOOR BOX RH

    Click here

12. INSTALL REAR DECK FLOOR BOX

    Click here

13. INSTALL NO. 2 DECK BOARD

    Click here

14. INSTALL NO. 1 DECK BOARD

    Click here

15. INSTALL DECK BOARD ASSEMBLY

    Click here