SPEED LIMITER SYSTEM

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

  • Use the following procedures to troubleshoot the speed limiter system.

  • *: Use the intelligent tester.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result

    Proceed to

    NEXT
    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard Voltage

    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding. .

    Result

    Proceed to

    NEXT
    NEXT

  3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

    1. Use the intelligent tester to check if the CAN communication system is functioning normally.

    Result

    Result

    Proceed to

    CAN DTC is not output

    A

    CAN DTC is output

    B
    B

    GO TO CAN COMMUNICATION SYSTEM

    Click here

    A

  4. PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table.

      Click here

    Result

    Result

    Proceed to

    Fault is not listed in problem symptoms table

    A

    Fault is listed in problem symptoms table

    B
    B

    ADJUST , REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

    A

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Operation Check.

      Click here

    2. Terminals of ECM.

      Click here

    3. Data List / Active Test.

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  6. ADJUST, REPAIR OR REPLACE

    Result

    Proceed to

    NEXT
    NEXT

  7. CONFIRMATION TEST

    Result

    Proceed to

    NEXT
    NEXT

    END