REAR PLANETARY GEAR DISASSEMBLY


  1. REMOVE REAR PLANETARY GEAR ASSEMBLY


    1. B007W45

      Remove the output shaft from the rear planetary gear.

  2. REMOVE PLANETARY OUTPUT SHAFT OIL SEAL RING


    1. B007S6S

      Remove the oil seal ring from the output shaft.

  3. REMOVE REAR PLANETARY RING GEAR


    1. B007Q6X

      Remove the rear planetary gear from the rear planetary ring gear.

  4. INSPECT 1 WAY CLUTCH NO.2


    1. B007U5EE01

      Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race can be turned freely counterclockwise and locked clockwise.

  5. REMOVE 1 WAY CLUTCH NO.2


    1. B007V7Q

      Remove the one-way clutch inner race from the rear planetary gear.

    2. B007RVT

      Using a screwdriver, remove the snap ring.

    3. B007VDK

      Remove the No.2 one-way clutch with the retainers from the rear planetary gear.

  6. REMOVE PLANETARY CARRIER THRUST WASHER NO.2


    1. B007S5B

      Remove the thrust washer No.2 from the rear planetary gear.

  7. REMOVE PLANETARY CARRIER THRUST WASHER NO.1


    1. B007UWI

      Remove the thrust washer No.1 from the rear planetary gear.

  8. REMOVE REAR PLANETARY FLANGE THRUST NEEDLE ROLLER BEARING


    1. B007TYF

      Remove the 2 races and the bearing from the rear planetary ring gear.

  9. REMOVE REAR PLANETARY RING GEAR FLANGE


    1. B007T8S

      Using a screwdriver, remove the snap ring.

    2. B007OPY

      Remove the ring gear flange.

  10. INSPECT PLANETARY PINION GEAR THRUST CLEARANCE


    1. B007QBD

      Using a feeler gauge, measure the planetary pinion gear thrust clearance.

      Standard clearance
      0.20 to 0.60 mm (0.0079 to 0.0236 in.)
      Maximum clearance
      0.65 mm (0.0256 in.)

      If the clearance is greater than the maximum, replace the planetary gear assembly.