DESCRIPTION
When the front doors are closed, each power window regulator motor assembly can control its power window operation for approximately 45 seconds after the engine switch is turned from on (IG) to off by receiving operation permission signals from the main body ECU (multiplex network body ECU).
However, when approximately 45 seconds have elapsed, or the driver door or front passenger door is opened within approximately 45 seconds of the engine switch being turned off, the power window regulator motor assembly stops operating.
During an auto operation, when 45 seconds have passed and key-off operation is prohibited, the power window stops immediately.
CAUTION / NOTICE / HINT
Note
The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.
If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.
If the main body ECU (multiplex network body ECU) is replaced, refer to Service Bulletin.
PROCEDURE
CHECK MANUAL UP / DOWN FUNCTION
Check that the manual up and down function using the multiplex network master switch assembly and power window regulator switch assembly can operate the power windows.
| OK |
|---|
| Manual up and down function is normal. |
| Result | |||
|---|---|---|---|
|
| NG |
|
GO TO OTHER PROBLEM Click here |
| OK |
|
CHECK REMOTE UP / DOWN FUNCTION
Check that the remote up and down function using the multiplex network master switch assembly can operate all the power windows.
| OK |
|---|
| Remote up and down function is normal. |
| Result | |||
|---|---|---|---|
|
| NG |
|
GO TO OTHER PROBLEM Click here |
| OK |
|
CHECK KEY-OFF OPERATION FUNCTION
Check the key-off operation function.
| Result | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| B |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |
| C |
|
REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH Click here |
| D |
|
REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH Click here |
| E |
|
REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH Click here |
| F |
|
REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH Click here |
| G |
|
REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH Click here |
| H |
|
REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH Click here |
| A |
|
READ VALUE USING GTS (MAIN BODY)
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Courtesy SW | Front door courtesy light switch assembly RH signal | OFF or ON | OFF: Front door courtesy light switch assembly RH closed ON: Front door courtesy light switch assembly RH open |
for RHD |
| FL Door Courtesy SW | Front door courtesy light switch assembly LH signal | OFF or ON | OFF: Front door courtesy light switch assembly LH closed ON: Front door courtesy light switch assembly LH open |
for LHD |
| Tester Display |
|---|
| FL Door Courtesy SW |
| OK |
|---|
| On the GTS screen, ON or OFF is displayed accordingly. |
| Result | |||
|---|---|---|---|
|
| OK |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |
| NG |
|
GO TO LIGHTING SYSTEM Click here |