FRONT SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. A closed cross-section type light and rigid pressed sheet steel front lower No. 1 suspension arm sub-assembly is used.

    2. A sleeveless horizontal axis No. 1 bush and a vertical axis No. 2 bush with sleeve have been adopted. By optimizing compliance characteristics, both excellent ride comfort and controllability have been achieved.

    3. The protruding shape and axial holes of the No. 2 bush optimize the spring characteristics.

      A01R1VLC01
      *1 Front Lower No. 1 Suspension Arm Sub-assembly - -
      *a No. 1 Bush *b No. 2 Bush
      *c Top View of No. 2 Bush *d No. 1 Bush Cross Section
      *e No. 2 Bush Cross Section *f Axial Hole