FRONT SEAT CUSHION HEATER INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH

    1. B221225

      Install the front seat cushion heater assembly LH to the separate type front seat cushion cover with new tack pins.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

    Click here

  3. INSTALL SEAT CUSHION COVER WITH PAD

    Click here

  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  5. INSTALL FRONT SEAT UNDER TRAY (w/ Under Tray)

    Click here

  6. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  7. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  8. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  9. INSTALL VERTICAL ADJUSTING HANDLE LH

    Click here

  10. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP

    Click here

  11. INSTALL FRONT SEAT ASSEMBLY

    (Click here)

  12. CHECK SRS WARNING LIGHT

    (Click here)

  13. INSPECT FRONT SEAT ASSEMBLY

    1. Check the seat heater operation.

      1. Turn the ignition switch to ON.

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.