EXHAUST FUEL ADDITION INJECTOR INSPECTION

PROCEDURE

  1. INSPECT EXHAUST FUEL ADDITION INJECTOR ASSEMBLY

    1. A201818C02

      *a

      Component without harness connected

      (Exhaust Fuel Addition Injector Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      20°C (68°F)

      7.1 to 7.9 Ω
      Tip:

      The temperature indicated in "Condition" is the temperature of the exhaust fuel addition injector assembly.

      If the result is not as specified, replace the exhaust fuel addition injector assembly.