FRONT DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the bolt.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

    2. Connect the connector.

  2. INSTALL CENTER PILLAR LOWER GARNISH

    Click here

  3. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

    for LH Side: Click here

    for RH Side: Click here

  4. INSTALL REAR DOOR SCUFF PLATE

    Click here

  5. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    for LH Side: Click here

    for RH Side: Click here

  6. INSTALL FRONT DOOR SCUFF PLATE

    Click here