REAR COMBINATION LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01E2CG

      Remove the 2 bolts.

    2. Detach the 2 clips.

    3. Disconnect the connector and remove the rear combination light assembly LH.

  2. REMOVE TAIL AND STOP LIGHT BULB


    1. A01DVQI

      Turn the rear combination light socket and wire subassembly LH in the direction indicated by the arrow in the illustration and remove the socket and bulb.

    2. Remove the tail and stop light bulb from the rear combination light socket and wire sub-assembly LH.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01E14L

      Turn the rear combination light socket and wire subassembly LH in the direction indicated by the arrow in the illustration and remove the socket and bulb.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly LH.

  4. REMOVE BACK UP LIGHT BULB


    1. A01E0P9

      Turn the rear combination light socket and wire subassembly LH in the direction indicated by the arrow in the illustration and remove the socket and bulb.

    2. Remove the back up light bulb from the rear combination light socket and wire sub-assembly LH.

  5. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. A01DWH1

      Using a screwdriver, detach the claw.

    2. Detach the guide and remove the rear combination light socket and wire sub-assembly LH.