COOLER EXPANSION VALVE INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL COOLER EXPANSION VALVE

   1. Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of a new cooler expansion valve.

      Compressor Oil
      VC200YF or equivalent

   2. Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.

      Note:

      Keep the O-rings and O-ring fitting surfaces free from dirt and foreign matter.

   3. Using a 4 mm hexagon socket wrench, install a new cooler expansion valve with the 2 hexagon bolts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

2. CONNECT AIRCONDITIONER HOSE AND ACCESSORY ASSEMBLY

   1. Remove the vinyl tape from the air conditioner hose and accessory assembly.

   2. Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the air conditioner hose and accessory assembly.

      Compressor Oil
      VC200YF or equivalent

   3. Install the 2 O-rings to the air conditioner hose and accessory assembly.

      Note:

      Keep the O-rings and O-ring fitting surfaces free from dirt and foreign matter.

   4. Connect the air conditioner hose and accessory assembly.

   5. Insert the hose joint into the fitting hole securely and install the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

   6. Install the bolt to the radiator support sub-assembly.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

3. INSTALL FRONT UPPER BUMPER SUPPORT

   Click here

4. INSTALL FRONT BUMPER COVER

   Click here

5. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

   for HFC-134a (R134a):

   Click here

   for HFO-1234yf (R1234yf):

   Click here

6. WARM UP ENGINE

   for HFC-134a (R134a):

   Click here

   for HFO-1234yf (R1234yf):

   Click here

7. INSPECT FOR REFRIGERANT LEAK

   for HFC-134a (R134a):

   Click here

   for HFO-1234yf (R1234yf):

   Click here