INITIALIZATION
Note
When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Stop and Start System (for 2AR-FE) | |
| Stop and Start System (for 2GR-FKS) | |
| Panoramic View Monitor System | |
| Power Door Lock Control System | |
| Air Conditioning System | |
| Power Slide Door System | |
| Power Back Door System |
CHARGING SYSTEM PRECAUTION
Note
Check that the battery cables are connected to the correct terminals.
Disconnect the battery cables when the battery is given a quick charge.
Do not perform tests with a high voltage insulation resistance tester.
Never disconnect the battery cables while the engine is running.
Check that the charging cable nuts are tightened on terminal B of the generator assembly and on the engine room relay block and junction block assembly.