AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

PROCEDURE

1. CHECK IF A PROPER CD IS INSERTED

   1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      Tip:

      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs with adhesive paper labels should not be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.

   Result

   Proceed to
   CD is normal
   CD is abnormal

   CD is abnormal

   END (CD IS DEFECTIVE)

   CD is normal

2. CHECK THAT CD IS INSERTED PROPERLY

   1. Check whether or not the CD is inserted upside down.

   Result

   Proceed to
   CD is properly inserted
   CD is not properly inserted

   CD is not properly inserted

   SET CD PROPERLY

   CD is properly inserted

3. CLEAN CD AND RECHECK

   1. 

      Disc cleaning.

      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to outside in a radial direction.

         Note:

         Do not use a conventional record cleaner or antistatic preservative.

   Result

   Proceed to
   Malfunction disappears
   Malfunction appears

   Malfunction disappears

   END (CD IS DIRTY)

   Malfunction appears

4. CHECK CD

   1. Replace the CD with a known good one and check that the malfunction disappears.

   Result

   Proceed to
   Malfunction disappears
   Malfunction appears

   Malfunction disappears

   END (CD IS DEFECTIVE)

   Malfunction appears

   REPLACE RADIO RECEIVER ASSEMBLY

   Click hereClick hereClick here