SHIFT PADDLE SWITCH REMOVAL

PROCEDURE


  1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  2. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LOWER NO. 3 STEERING WHEEL COVER

    Click here

  5. REMOVE LOWER NO. 2 STEERING WHEEL COVER

    Click here

  6. REMOVE STEERING PAD

    Click here

  7. REMOVE STEERING WHEEL ASSEMBLY

    Click here

  8. REMOVE TRANSMISSION SHIFT SWITCH ASSEMBLY

    A004QVU

    1. Detach the clamp from the steering wheel.

    2. Disconnect the switch wire connector from the steering wheel assembly.

    3. A004U7WE03
      Text in Illustration
      *1 Switch Wire

      Disconnect the 2 connectors from the 2 shift switches, and remove the switch wire.

    4. A004Q2TE03
      Text in Illustration
      *1 Shift Switch
      *2 Bracket

      Remove the 4 screws, 2 brackets and 2 shift switches.