MANUAL TRANSAXLE OIL ON-VEHICLE INSPECTION

PROCEDURE

  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. INSPECT MANUAL TRANSAXLE OIL

    1. C274885

      Remove the manual transmission filler plug and gasket.

    2. D105723C02

      *a

      0 to 5 mm

      Check that the oil surface is between 0 and 5 mm (0.20 in.) from the bottom lip of the manual transmission filler plug opening.

      Note:

      An excessively large or small amount of manual transaxle oil may cause problems.

    3. Check for oil leakage when the oil level is low.

    4. C274885

      Install a new gasket and the manual transmission filler plug.

      39.2 N*m

      400 kgf*cm

      29 ft.*lbf

  3. INSTALL NO. 1 ENGINE UNDER COVER

    Click here