CHARGING SYSTEM PRECAUTION

  1. Check that the battery cables are connected to the correct terminals.

  2. Disconnect the battery cables using a battery quick charger.

  3. Do not perform tests with a high voltage insulation resistance tester, such as a megohmmeter.

  4. Never disconnect the battery while the engine is running.

  5. Check that the charging cable nuts are tightened on terminal B of the generator and the engine room No. 1 relay block.

  6. IGNITION SWITCH EXPRESSION

    The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Expression

    Ignition Switch (position)

    Engine Switch (condition)

    Ignition Switch off

    Off

    Off

    Ignition Switch ON

    ON

    On (IG)

    Ignition Switch ACC

    ACC

    On (ACC)

    Engine Start

    START

    Start