INTEGRATION RELAY ON-VEHICLE INSPECTION


  1. CHECK INTEGRATION RELAY


    1. A01E0X1E01
      A01E1KR

      Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room junction block.

      Tech Tips

      Tape the screwdriver tip before use.


      1. Measure the voltage of the C/OPN relay.

        Standard resistance
        Tester Connection Condition Specified Condition
        IJ-8 - Body ground Ignition switch ON 10 to 14 V

        If the result is not as specified, replace the integration relay.

      2. A01E1KR

        Measure the voltage of the MAIN relay.

        Standard resistance
        Tester Connection Condition Specified Condition
        IJ-4 - Body ground Ignition switch ON 10 to 14 V

        If the result is not as specified, replace the integration relay.