AIR SUSPENSION SYSTEM DTC CHECK / CLEAR


  1. CHECK FOR DTC


    1. Turn the engine switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the engine switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Chassis / Air suspension / Trouble Codes.


      Chassis > Air suspension > Trouble Codes

      Tech Tips

      When freeze frame data is stored, check the freeze frame data.

      Click here

    6. Read the DTCs by following the prompts on the GTS screen.

      Tech Tips

      Refer to the GTS operator's manual for further details.

    7. Refer to Diagnostic Trouble Code Chart for DTC information.

      Click here

  2. CLEAR DTC

    Tech Tips

    After repairing the malfunctions, clear the DTCs.


    1. Turn the engine switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the engine switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Chassis / Air suspension / Trouble Codes.


      Chassis > Air suspension > Clear DTCs

      Note

      DTCs and freeze frame data are cleared at the same time.

    6. Clear the DTCs by following the prompts on the GTS screen.

      Tech Tips

      Refer to the GTS operator's manual for further details.