POWER BACK DOOR SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE POWER BACK DOOR SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / PSD & PBD or Warning operation.

      5. Select the setting by referring to the table below.


        PSD & PBD operation
        Tester Display Description Default Setting ECU
        PBD SW Operation Function that changes the time necessary to operate the back door control switch between pressed once and held down for 0.8 seconds. 0.8s 0:0.0s,1:0.8s Multiplex network door ECU
        Door Unlock with 1 Motion. Function that selects the door or doors to unlock when the back door is locked and the transmitter switch (electrical key transmitter sub-assembly) is pressed to operate the power back door. ALL DOORS 0:BackDoor,1:ALL DOORS Multiplex network door ECU
        Wireless Power Back Door Open Function that operates the power back door by pressing the transmitter switch (electrical key transmitter sub-assembly). Lock: OFF/Unlock: 0.8s 0000:"Lock:OFF/Unlock:OFF",0001:"Lock:OFF/Unlock:ON",0010:"Lock:OFF/Unlock:Twice",0011:"Lock:OFF/Unlock:0.8s",1010:"Lock:Twice/Unlock:Twice",1011:"Lock:0.8s/Unl**cut** Multiplex network door ECU
        PBD Assist Open Operation Function that enables/disables the power back door assist open operation. When set to ON, the back door will open automatically when the back door open switch assembly (opener switch) is operated. ON 0:OFF,1:ON Multiplex network door ECU
        PBD/Emblem Sensor Function Function that enables/disables the power back door and rear emblem sensor assembly. PBD ON/Emblem ON 00:PBD OFF/Emblem OFF,01:PBD ON/Emblem OFF,10:PBD ON/Emblem ON Multiplex network door ECU
        PBD Buzzer Volume Adjust Function that changes the volume setting of the power back door buzzer. Large 00:Small,01:Middle,10:Large Multiplex network door ECU
        PBD Buzzer Function Function that changes the power back door buzzer setting. Start Buzzer ON/In Operation Buzzer OFF 00:OFF,01:Start Buzzer ON/In Operation Buzzer OFF,10:Start Buzzer OFF/In Operation Buzzer ON,11:ON Multiplex network door ECU
        Emblem Sensor Detection Sensitivity Function that changes the sensitivity of the rear emblem sensor assembly. Low 00:Low,01:Middle,10:High Multiplex network door ECU
        PBD Assist Close Operation Function that enables/disables the power back door assist close operation. When set to ON, the back door will close automatically when operated in the close direction manually. ON 0:OFF,1:ON Multiplex network door ECU
        Power Back Door Opening Adjust Function that changes the position that the power back door stops during an open operation. 5:Max 000:"1:Min",001:"2:Small",010:"3:Middle",011:"4:Large",100:"5:Max" Multiplex network door ECU

        Warning
        Tester Display Description Default Setting ECU
        User Support Service Function Function that enables/disables the power back door. ON 0:OFF,1:ON Multiplex network body ECU

    2. Customizing with the Multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Other Vehicle Settings.

      3. Select the setting by referring to the table below.

        Display Description Default Setting ECU
        Power back door opening adjust Function that changes the position that the power back door stops during an open operation. 5 5, 4, 3, 2 or 1 Multiplex network door ECU

    3. Customizing with the multi-information display (combination meter assembly)


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Vehicle Settings / PBD (Power Back Door Settings).

      3. Select the setting by referring to the table below.

        Display Description Default Setting Relevant ECU
        System Settings (Power Back Door On/Off) Function that enables/disables the power back door and rear emblem sensor assembly. All On All On / Touchless Sensor Off / All Off Multiplex network door ECU
        Opening Adjustment (Power Back Door Opening Adjustment) Function that changes the position that the power back door stops during an open operation. 5 1/2/3/4/5 Multiplex network door ECU
        Volume (Power Back Door Alert Volume) Function that changes the power back door buzzer setting. 3 1/2/3 Multiplex network door ECU