FRONT SEAT INNER BELT ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


    1. Install the front seat belt anchor plate.

    2. A01SISGC01
      *a Protruding Part

      Install the front seat inner belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

    3. Attach the wire harness clamp.

    4. A01SHL7C01
      B0069FO Install in this Direction

      Close the cover as shown in the illustration.

    5. A01SFYC

      Attach the wire harness clamp and connector clamp.

  2. INSTALL FRONT SEAT ASSEMBLY

    Click here