ROOM TEMPERATURE SENSOR REMOVAL

PROCEDURE

1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

   Click here

2. REMOVE COWL SIDE TRIM BOARD LH

   Click here

3. REMOVE CONSOLE ARMREST ASSEMBLY

   Click here

4. REMOVE UPPER REAR CONSOLE PANEL

   Click here

5. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

   Click here

6. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

7. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

10. REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)

    
    

    1. 

       Detach the 2 claws.

    2. Disconnect the connector.

    3. Disconnect the aspirator hose and remove the cooler thermistor (room temperature sensor).